Learning The “Secrets” of Services

Vacuum Excavation: Best Practices for Top Productivity

In the process of digging, there are a lot of techniques in use today. Some of these methods are old-fashioned in nature, but others are modern. These new methods used by drilling companies have made digging easier, faster and safer. Vacuum excavation is an appropriate example which uses water or air in the digging process. The following tips and practices are helpful in ensuring successful excavation.

Where there is soil that is hard-packed and heavy, air is not a good choice as a vacuuming agent. In such cases, hydro excavation, or the use of water is most preferred. There are areas where the dig site might have loose soil, with a lot of sand and gravel, and in such places, dry or air excavation would be a wise choice. In terms of safety, dry excavation is the better method, unlike using pressurized water in hydro excavation, because you cannot damage older pipes or electrical wires that are brittle.

With regard to the size of the vacuuming pumps to be used, it is important to take into account the sizes of the trucks to be used in the excavation. If the vacuum power created for the digging is to be strong enough, then the size of the air or water tank must correspond to the size of the vacuum pump. This implies that if you require a lot of vacuum power, both the tank used and the pump should be large. Tanks larger than the normal ones used are going to be needed if both wet and dry methods of excavation are to be applied.

However much vacuuming, whether dry or wet, is considered to be safe than old fashioned digging methods, safety issues must be addressed. Proper training on how to handle and operate machines safely should be introduced. Special training for the people going to operate the machines should first take place before they start. Therefore, the people going to use them must be taught how to operate them. Due to the presence of underground utility pipes and power lines, the operators of the machinery should be careful. Proper clothing and gear to be used should be given to the workers. Dielectric boots and hand gloves are examples.

Digging by using the vacuuming technique is a precise process. Accidents can sometimes occur in the excavation process. The wrong site can be excavated due to human error, or choosing the wrong site. Such mistakes can cause interference with electric lines and gas pipes leading to gas explosions or electrocution. It is vital that the necessary authorities are contacted to confirm if the intended digging location is the correct one, and provide accurate maps.

Proper maintenance of the vacuum trucks and the pumps used by the drilling company must be observed. This will ensure that the machines will perform at expected standards. Tear and wear often occurs to machines that are being used, so close monitoring should be paramount. Regularly lubricate the machines, placing emphasis on the moving parts. Check out all the parts like hoses, nozzles among others. The outlined practices will assist in successful vacuum excavation.

A Beginners Guide To Experts

Smart Tips For Uncovering Professionals